Stainless steel tap with Aqua Aurora vitaliser for water filter

The best of both worlds! The Stainless Steel Tap with Aqua Aurora vitaliser for water filters lets you vitalise your filtered water as you dispense it, so that you can then enjoy delicious filtered and vitalised water! The perfect addition to your Berkey, BOROUX or Pure Filters water filter!

This Stainless Steel Tap with Aqua Aurora vitaliser is of high quality and beautifully finished. It makes your water filter complete. It fits all stainless steel Berkey water filters (so not the Berkey Light) and even the stainless steel BOROUX water filter systems and the Pure Filters water filter systems.

Vitalising with the Stainless Steel Tap with Aqua Aurora vitaliser

The water that comes out of our taps these days has been strongly influenced by its unnatural surroundings. Water is chemically purified and then transported to the consumer through extensive pipe systems. During this process the water loses its original power and absorbs all kinds of burdensome information. For instance, we know that water is burdened by radiation, such as from high-voltage power lines, transmission masts and generators. But we also know that when water is chemically cleaned, the burdens are still energetically present. Vitalisers can erase this burdensome information and replace it with the frequencies of shell lime. This gives the water its original power back and its negative frequencies are erased. A Berkey, BOROUX or Pure Filters water filter purifies the water, but does not vitalise it. With this combination, the process is therefore fully complete!

The Stainless Steel Tap with Aqua Aurora vitaliser therefore ensures that the water regains its natural vibration. The vitaliser works on the frequency of shell lime. This makes unnatural frequencies from radiation and energetic burdens from other toxic substances disappear. People, plants and animals respond to this immediately and become more vital themselves. The result is fewer health problems in people and less illness and loss in plants and animals.

The way an Aqua Aurora Vitaliser works is simple. The vitaliser consists of a stainless steel tube through which the water flows. The double-walled water-carrying tube is made of stainless steel 316, which is certified for the food industry. The vitaliser is filled with material in which the desired frequency (shell lime) is stored. It passes this frequency on to the water flowing through. The vitaliser erases burdensome frequencies and replaces them with the frequency of the material (shell lime) in the vitaliser. In the case of the Aqua Aurora vitalisers, unlike other vitalisers, the work is mainly done with frequencies based on shell lime (this is still very close to the original primal information of our earth, as it were the vibration of Mother Earth). This makes these vitalisers unique compared with other vitalisers.

Features of the Stainless Steel Tap with Aqua Aurora vitaliser:

• Made of high-quality stainless steel

• Beautifully polished finish

• The whole unit sticks out approx. 17 cm from the water filter

• Wide opening of the spout

• Simple on / off handle position

• Fill a 250 ml glass in a few seconds

• Includes everything you need, such as a nut, cover plate, silicone sealing rings and (if necessary) sealing tape. Everything needed for a simple installation.

• Already fully assembled and tested beforehand. So all you have to do is mount it

The perfect addition to your Berkey, BOROUX or Pure Filters water filter

So simply order it with your stainless steel Berkey water filter, BOROUX water filter or Pure Filters water filter. The Berkey stainless steel tap is already a popular addition to a water filter, but this Stainless Steel Tap with Aqua Aurora vitaliser now makes the process fully complete!

Mounting

Mounting is very simple. The tap is already fully assembled and tested beforehand. It is supplied as an assembly consisting of a stainless steel tap with Aqua Aurora vitaliser, 1 nut sleeve, 1 stainless steel cover plate, 1 black rubber sealing ring and 1 white silicone sealing ring.

Push the tap through the hole in the lower chamber of the water filter. Make sure the black rubber sealing ring (already on the thread) is on the outside. Slide the white silicone sealing ring onto the thread on the inside, followed by the other stainless steel cover plate. See the image below.

Next, screw the nut sleeve onto the thread of the tap (on the inside of the water filter) and tighten it well (until you can't turn it any further). Then hold the nut sleeve still on the inside and start turning the tap on the outside. You will notice that it then sits even tighter. Keep doing this until it won't go any further. If the tap is then not straight, do the following: let go of the nut sleeve on the inside and turn only the tap on the outside until it sits straight. It then turns as a whole. If you have accidentally turned too far, do NOT turn back. That would loosen it again. If you have gone too far, simply keep turning the whole thing round until it sits properly again.

You are now ready to use it and can draw water from the water filter.